Android to Apple: How To Transfer Photos From Lava Blaze Curve 5G to iPad Easily

If you are an Android user and have recently switched to an iPad, you might be wondering how to transfer photos from Lava Blaze Curve 5G to iPad. It is a common question that many people ask when they switch from one device to another. Fortunately, there are several ways to transfer photos from Lava Blaze Curve 5G to iPad easily. In this article, we will show you how to do it using different methods.

We are living in a world where capturing memories is at our fingertips, and the need to share photos across different devices is more prevalent than ever. Whether you’re looking to share your photos with friends or ensure a secure backup, transferring photos from your Android to your iPad shouldn’t be a hassle.

This article is your ultimate guide to executing photo transfer with no problems. We’ll walk you through the process of how to transfer photos from Lava Blaze Curve 5G to iPad as well as iPhone, highlight common mistakes to avoid, and make sure your cherished moments are transferred seamlessly.

Part 1. How Can I Transfer Photos From Lava Blaze Curve 5G to iPad Directly?

For a straightforward photo transfer from Lava Blaze Curve 5G to iPad, Apple’s Move to iOS app can be an excellent choice. It’s important to note, though, that your iPad must be in setup mode for this method to work. If it’s not in setup mode, you’ll need to perform a reset on your iPad before proceeding with the transfer.

How can I transfer photos from Lava Blaze Curve 5G to iPad? Follow the steps below.

Step 1: Set Up Your iPad.

As you set up your iPad, reach the “Apps & Data” screen and select “Move Data from Android.”

Step 2: Install and launch Move to iOS on your Lava Blaze Curve 5G.

Install Move to iOS and open the app on your Android. Review the terms and conditions and press “Agree” to proceed.

Step 3: Enter the code.

A six to ten-digit code will be displayed on your iPad screen. Enter this code when prompted on your Lava Blaze Curve 5G.

Step 4: Select photos to transfer.

In the Move to iOS app, choose “Photos” to transfer your images. Then, tap “Continue” to initiate the transfer process. Remember to keep your devices close to each other and connected to power until the transfer process is completed for quicker transfer.

Step 5: Transfer complete.

Allow the app to complete the transfer process. Once the transfer is complete, you will be prompted to finish setting up your iPad. Follow the instructions to complete the setup process.

Part 2. How to Transfer Photos from Lava Blaze Curve 5G to iPad Using Cloud Services (Google Drive)

In addition to dedicated apps like Move to iOS, you can also use cloud-based storage services such as Google Drive to transfer photos from Lava Blaze Curve 5G to iPad.

Because it’s stored in the cloud, you can find your photos from any device as long as there is an internet connection. Just upload your photos to Google Drive and later download them on your iPad. It’s also suitable for backup purposes. Google provides its users a 15 GB of free storage.

How to transfer photos from Lava Blaze Curve 5G to iPad with Google Drive:

Step 1: Upload photos to Google Drive.

Open Google Drive on your Lava Blaze Curve 5G, navigate to the “+” icon, and select “Upload.” Choose the photos you want to transfer and upload them to your Google Drive.

Step 2: Access Google Drive on iPad.

On your iPad, download and install Google Drive if you haven’t. Log in with the same Google account used on your Lava Blaze Curve 5G.

Step 3: Download Photos to iPad.

Locate the uploaded photos in Google Drive on your iPad. Tap on each photo or select multiple photos, then click download to save them directly to your iPad.

Part 3. How to Share Pics From iPhone to Android with Dr.Fone

In addition to transferring photos from Lava Blaze Curve 5G to iPad, you might also be interested in sharing pictures from iPhone to Android. Although both iPad and iPhone belong to the same Apple ecosystem, they function on slightly distinct operating systems— iPads utilize iPadOS, whereas iPhones operate on iOS.

For an efficient transfer of pictures from iPhone to Android, Wondershare Dr.Fone comes into play. This versatile tool features a dedicated Phone Transfer tool that enables comprehensive sharing of photos and other media content.

This method is particularly well-suited for streamlined bulk photo transfers, making it an ideal choice for individuals seeking a more encompassing solution for data transfer.

Dr.Fone Basic

Backup & Restore iOS Data Turns Flexible.

• One-click to back up the whole iOS device to your computer.
• Preview and selectively restore files to any device with simplicity.
• Export what you want from the backup to your computer.
• Your device’s data remains intact during the restore process.
• Supports iPhone, iPad, iPod touch, and the latest iOS version.

4,781,237 people have downloaded it

How to share pics from iPhone to Android with Dr.Fone Phone Transfer tool:

Step 1: Open Dr.Fone’s Phone Transfer tool

Make a connection between your iPhone and your Lava Blaze Curve 5G on your computer. Launch Wondershare Dr.Fone on your computer and navigate to Toolbox > Phone Transfer.

Step 2: Specify the source and destination devices

After connecting them, the platform will identify the connected devices and load their data. Choose iPhone as the source and Android as the destination device to set the transfer path. Use the Flip button to alter the transfer direction.

Step 3: Choose photos for the transfer

Proceed to select the types of data you wish to transfer. Checkmark photos and click the Start Transfer button. If you want to remove existing data from the destination device, you can select “Clear data before copy.”

Step 4: Disable iCloud syncing

Now, Dr. Fone’s Phone Transfer tool should prompt you to disable iCloud syncing. Follow the instructions.

Step 5: Monitor data transfer progress

The progress of the data transfer will be displayed in a pop-up window. Once completed, click OK to conclude the process.

Part 4. Mistakes to Avoid When Transferring Photos from Lava Blaze Curve 5G to iPad/iPhone

Transferring photos from your Lava Blaze Curve 5G to an iPad or iPhone holds the promise of seamless photo sharing. However, several factors can contribute to the failure of file transfer processes. To address them, it’s essential to navigate through common mistakes that users often encounter so you won’t make the same errors.

1. Insufficient battery levels

Users often attempt photo transfers with low battery levels on either device. For a successful process, it is crucial to make sure that both your Android and iPad/iPhone have sufficient battery levels or are connected to power sources during the transfer.

2. Limited storage space

Overlooking available storage space on the iPad/iPhone is a common oversight. To avoid transfer failures, check and clear sufficient space on your iPad/iPhone to accommodate the photos you intend to transfer.

3. Interference from Third-Party Apps:

Allowing interference from other apps during the transfer. Close unnecessary apps on both devices to prevent potential conflicts and ensure a smoother transfer process.

4. Ignoring file compatibility:

Apple and Android devices often have varying file compatibilities. For example, iPhones commonly employ the HEIC format, which may pose recognition challenges on Android devices. So, verify that the photo formats are compatible with both Android and iOS devices. If necessary, convert files to ensure a trouble-free transfer.

5. Skipping App Permissions:

When you use apps to transfer files, they usually ask for permission to access your media files. While it’s common for users to overlook this step or hesitate to do it, not granting access can actually lead to transfer failures. The app needs permission to access and transfer files securely.

Conclusion

Although they work in different operating systems, transferring photos between Android and Apple devices, including iPad and iPhone, can be accomplished through various methods. Apps like Move to iOS and Dr.Fone provide straightforward solutions, while cloud services like Google Drive offer convenient alternatives.

How to Transfer Contacts from Lava Blaze Curve 5G to Other Android Devices Devices?

Android, which is developed by the Google, has a very strong mobile operating system. It is totally based on the Linux kernel and specially designed for touch screen mobile devices such as smartphones and tablets. And these Android mobiles are used by millions of people. Some of the users might feel the need to transfer their contacts from one Android device to another due to up gradation or changing of the mobile. There are many methods which can help transfer contacts from Lava Blaze Curve 5G to Other Android Devices.

So for all those who want to know how to transfer contacts from Lava Blaze Curve 5G to Other Android Devices, keep reading to know more.

Part 1: How to transfer contacts from Lava Blaze Curve 5G to Other Android Devices using Dr.Fone toolkit?

One of the most popular toolkit to transfer contacts from Lava Blaze Curve 5G to Other Android Devices is the Dr.Fone toolkit - Phone Transfer . This is a revolutionary application for your entire backup and restores solutions. This application supports over 8000+ Android devices worldwide and with its advanced features, the application allows the user to take backup and restore by selecting their needs and requirements.

Dr.Fone - Phone Transfer

Transfer Everything from Android/iPhone to New iPhone in 1 Click.

• It supports all the leading iOS devices, including devices running on iOS 11.
• The tool can transfer your photos, videos, contacts, messages, music, call logs, notes, bookmarks, and so much more.
• You can transfer all your data or select the type of content you wish to move.
• It is compatible with Android devices as well. This means you can easily perform a cross-platform transfer (e.g. iOS to Android).
• Extremely user-friendly and fast, it provides a one-click solution

3,748,995 people have downloaded it

Ensure you have a good PC where you would download and install the Dr.Fone software. When the software has installed, go to desktop home screen and double click on the icon. You can follow the steps below to start a file transfer.

Step 1. Click on “Phone Transfer” module after you open Dr.Fone toolkit

Step 2. Connect both phones to PC and select “Photos”

Using a good USB cable, connect both old and new devices to your PC. When that is done, a list of data that can be transferred will appear. Choose “Photos” and this will move your photos from the source device to the destination device. You can also change both devices between “source” and “Destination” by using the “Flip” button.

Step 3. Click “Start Transfer”

Click on the button “Start Transfer”. Keep phones connected. Dr.Fone starts to transfer photos. Go to view transferred photos on the destination phone until it completes.

Part 2. How to Transfer Photos from Old Android to New Android Using NFC

Near Field Communication(NFC) is a technology that supports Android Beam and is ideal for transferring data between android devices by just pressing their backs together. It is a fast and simple program that requires both devices to NFC-capable. This means they are able to communicate with each other when their fields are near. This communication is made possible through radio frequencies. Most devices have NFC hardware integrated underneath their panel.

NFC can be found in almost every android device. In the past, it was easy to identify devices with NFC as such devices usually had NFC printed somewhere in the back of the Lava Blaze Curve 5G devices, most tines on the battery pack. But since most android devices don’t have a removable back, there is an alternative to checking if your device is NFC enabled.

• On your Lava Blaze Curve 5G, tap on “Settings” and click on “More” located under “Wireless and Networks” .

• This would take you to a screen where you should find the NFC and android beam options as depicted in the image below. At this stage enable both options if any or both have been disabled. If the NFC option doesn’t appear, it then means your device does not have Near Field Communication (NFC) functionality.

• Another method of checking is by opening the settings menu and tapping on the search icon. Type in “NFC”. If your phone is capable, it will show up. The NFC function works hand-in-hand with the android beam. NFC may not work at optimal levels if the android beam is “off”.

To Transfer Photos from your old android device to a new android device, ensure both devices support NFC using the method explained above. Once this is confirmed, use the Android beam to access the photos you want to transfer to your new android device.

To select multiple photos, long press on a photo. Then choose the photos you want to transfer to new android device. When you are done selecting, you can begin the beaming process.

Next, place both devices against each other, back to back.

At this stage, both an audio sound and visual message will appear, acting as confirmation that both devices have found each other’s radio waves.

Now, on your old android device, the screen will reduce to a thumbnail and a “Touch to beam” message will pop up at the top.

To begin beaming, you must touch the screen on your old android device from where the photos are been sent. A sound will alert you that beaming has started.

To ensure a successful transfer, make sure devices are not locked neither should the screen be turned off. Also, both devices should be kept back-to-back throughout the duration of the transfer.

Finally, when the beaming is complete, you will hear an audio sound. This is to confirm the completion of the process. Alternatively, instead of an audio confirmation, the application on your new android device to which the photos were sent will automatically launch and display the beamed content.

Now, we’ll discuss how to transfer contacts from one Android to another with the help of a SIM card.

Part 2: How to transfer contacts from Lava Blaze Curve 5G to Other Android Devices using SIM card?

Here are the steps which will help you.

• To copy the contacts to your SIM card, you should follow the sequence –
• Go to “contact” on your old device.
• Then tap on “More” and then choose “settings”.
• Here you can find “import / Export” option. Tap on it and then choose “Export” option.
• Now click on “Export to SIM card” option. On choosing this step, all your contacts will be copied to the SIM card in a few minutes. This depending upon the capacity of the SIM card.

Now, pull the SIM card out and insert in on your new device.

• Here follow the same steps above and on “Import / Export” option, choose “Import”. Then it will ask for the option to import from. Choose “SIM Card” here. Now, all your contacts will be imported to your phone memory from the SIM card.

Advantages: This process is easy to use and can be done without any PC.

Disadvantage: It can only transfer the contacts up to the SIM capacity that is 200 to 250 in one time. If you have lots of contacts, it is impossible to transfer by this method.

Part 3: How to transfer contacts from Lava Blaze Curve 5G to Other Android Devices using Bluetooth or Wi-Fi Direct?

To transfer contacts from Lava Blaze Curve 5G to Other Android Devices using Bluetooth or Wi-Fi Direct is one of the easiest methods. For this method, make sure that you should enable “Bluetooth” or “Wi-Fi Direct” on both the Android devices.

The steps:

1. Go to the “Contacts” menu on your old Android device.

2. Now, find “Import / Export” option. It might be under “More” > “Settings” menu. Tap on it.

3. Now go to “Share namecard via” option from the menu and select all the contacts to transfer process.

4. Now you have two options. Share via “Bluetooth” or ‘Wi-Fi Direct”. Select any option you want and accept from the other device.

5. After successful connection, all the contacts from old Android devices will be transferred to your new Android device.

This method is simple and easy to use.

There is yet another method to transfer contacts from Lava Blaze Curve 5G to Other Android Devices using Samsung’s own app “Smart Switch”.

Advantage: This is a very fast process.

Disadvantage : Sometimes the contacts are not saved automatically. You have to open the name card file one by one to save them. If you have a lot of contacts, this process is very hectic and lengthy.

Part 4: How to transfer contacts from Lava Blaze Curve 5G to Other Android Devices using Samsung Smart Switch?

Samsung launched a new app called “Smart Switch” to allow transfer of content between Android devices. Although, it does not support allAndroid devices.

To transfer contacts from Lava Blaze Curve 5G to Other Android Devices via this app, follow the below method step by step.

1. First of all, download the app on both the mobiles.

2. Then, open this app on new Android device and Start the process by tapping on “Start”.

3. Now, Select the new device as ‘Receiving device”

4. Now connect with your old device by opening the app on your old Android mobile. This will prompt to enter the pin number as displayed. Enter the same and hit “Connect” to start the process.

5. Now, select “Contact” on your old device and tap “Send”.

6. You should see a prompt on your new device which asks you to confirm the “receive” of the contact. Tap on “Receive” and all the contacts from your old device will be copied to your new Android device in few minutes.

Advantages: The process is very fast and can transfer all the contacts at once.

Disadvantages: This app is not supported on all the Android devices.  Also, the process is lengthy and needs some technical knowledge.

Thus, these were the four best options that you can use to transfer contacts from Lava Blaze Curve 5G to Other Android Devices. However, in our experience, the first method, the Dr.Fone toolkit- Android data backup and restore is by far the best and most secured among all solutions for transferring contacts from Lava Blaze Curve 5G to Other Android Devices. So, if you do not want to lose any data while transfer or worry about the security, use the Dr.Fone toolkit for the best result.

How to Transfer Data from Lava Blaze Curve 5G to Any iOS Devices

If you are a proud owner of smartphones running on two different operating systems such as Windows and iOS, you might face the challenging task of transferring the data from your Windows phone to iPhone. Transferring the data between the two devices running the OS of the different platforms is not as easy as it is when you have devices with a common platform. This article aims to guide you through two simple routes that you can follow to transfer the data stored in your Windows phone such as Lava Blaze Curve 5G to iPhone or other iOS devices. You don’t need to worry about how to transfer from Lava Blaze Curve 5G to iPhone or How to transfer contacts from Lava Blaze Curve 5G to iPhone anymore after reading this article. Read them on.

• 1. You can rely on some program/online service/website such as Outlook, CSV file format, Google Contacts, etc.
• 2. You may experience issues while transferring data from your Lava Blaze Curve 5G phone to iPhone.

Part 1: Transfer Data Wirelessly via Microsoft ID

Windows phones such as Lava Blaze Curve 5G depend on a Microsoft ID to back up your important data such as contacts, text messages, calendar, and device preferences. Once you have configured the data on your Lava Blaze Curve 5G smartphone, you can add the same Microsoft email address to your iPhone and then sync the data to it. Given below are the step-by-step instructions on how to transfer from Lava Blaze Curve 5G to iPhone via Microsoft ID:

Step 1: Make an account on Outlook.com.

1. Open www.outlook.com on the web browser on your smartphone or PC.

2. Once you are redirected to the website, tap the “Sign up” option from the top-right corner.

3. Enter the required information in the available fields to create an account.

Step 2: Sync the data on your Lava Blaze Curve 5G to Microsoft’s Outlook.com account.

1. Switch on your Lava Blaze Curve 5G smartphone.

2. Scroll through the Home screen to find the “Settings” option.

3. Once located, tap the “Settings” option to open it.

4. On the “Settings” window, locate and tap the “email+accounts” option to open it.

5. From the opened window, tap the “add an account” option.

6. After the “ADD AN ACCOUNT” window opens, tap “Outlook.com” from the available options.

7. Tap the connect button from the bottom-left corner of the OUTLOOK.COM window.

8. Once you are redirected to the outlook.com website, in the available fields, enter the credentials of your Microsoft account that you created earlier.

9. Tap the “Log in” button when done.

10. Wait till the data on your Lava Blaze Curve 5G automatically gets synchronized with your Outlook account.

Step 3: Import the data from your Outlook account to the iPhone.

1. Switch on your iPhone and scroll through the Home screen to locate the “Settings” option.

Note: Make sure your device is connected to the Internet.

2. Once located, tap to launch the “Settings” app.

3. On the opened “Settings” window, tap the “Mail, Contacts, Calendars” option.

4. After the “Mail, Contacts, Calendars” window opens, tap the “Add Account” Add Account option under the “ACCOUNTS” section.

5. From the available options, tap “Step two”Outlook.com.

6. Once the “Outlook” window opens, enter your Outlook account credentials, and tap “Next” from the top-right corner.

7. Wait till your device verifies your account.

8. Once your account details are verified and a list of transferrable data types is displayed on the screen, tap to slide the switch to the right for the data that you want to import.

Note: After you slide the switch to transfer the Contacts, iPhone provides you with an option to keep the contacts that are already stored in your device or delete them altogether before importing the new ones from your Outlook account. You can choose any option as per your requirement.

9. Once you have selected the data that you want to import, tap the “Save” button from the top-right corner.

10. Wait till the data gets imported to your iPhone.

Pros:

1. You can transfer your data for free using this method and the only requirement is Internet connectivity.
2. You are saved from downloading a third-party application to transfer your data.
3. You can easily transfer the data wirelessly without the need to make your PC as a go-between

Cons:

1. It is a time-consuming process.
2. You cannot transfer photos and media files by following this method.

Part 2: Transfer Data Using PhoneCopy

With PhoneCopy you can easily export data from your Lava Blaze Curve 5G to the PhoneCopy server, and then import the data from the PhoneCopy server to your new iOS device. It is easy to transfer contacts from Lava Blaze Curve 5G to iPhone with PhoneCopy. What you need is PhoneCopy iPhone Lava Blaze Curve 5G.

In order to do so, you need:

A registered PhoneCopy account.

1. On your computer, open any web browser of your choice and go to https://www.phonecopy.com/en/ .

Note: Make sure your device is connected to the Internet.

2. From the right section of the opened web page, click “REGISTER NOW.”

3. On the “REGISTRATION” page, populate the available fields with the correct values and click “CONTINUE” from the bottom.

4. Follow the on-screen instructions thereafter to complete the account creation process.

Note: You may need to activate your account using the confirmation mail that you would receive while completing the account creation process.

The PhoneCopy app on your Windows phone.

1. Power on your Lava Blaze Curve 5G smartphone.

Note: Make sure that the phone is connected to the Internet.

2. From the Home screen, locate and tap the Store icon to open the Windows App Store.

Note: You must use your Microsoft account to sign in to Windows Store before the phone allows you to download the apps.

3. Once you are on the “store” interface, search for and tap the “PhoneCopy” app

4. On the next window that appears, tap “Install” pato install PhoneCopy on your Windows phone.

After you have successfully installed PhoneCopy on your Lava Blaze Curve 5G, it is now time to export all your contacts to the PhoneCopy server. You can do so by following the steps given below:

Step 1: Export data to the PhoneCopy server.

1. On your Windows phone, locate and tap to launch the “PhoneCopy” app.

2. On the displayed interface, in the available fields provide your PhoneCopy account credentials (username and password) that you used to create your PhoneCopy account earlier.

3. Once done, tap the”Export to phonecopy.com” button and wait till all your contacts are exported to the PhoneCopy server.

Step 2: Import data to the iPhone from the PhoneCopy server.

1. Power on your iPhone.

Note: Make sure that your phone is connected to the Internet.

2. From the Home screen, locate and tap the Apple App Store icon.

Note: Ensure that you are signed in to the App Store using your Apple ID.

3. Search for, locate, download, and install the “PhoneCopy” app on your iPhone

4. Once installed, tap the “PhoneCopy” icon on your iOS device to launch the program.

5. When asked for, provide the same PhoneCopy credentials that you used to export the data from your Lava Blaze Curve 5G phone in the previous step.

6. After you are signed in to your PhoneCopy account on your iPhone, click the “Synchronize” button to import all the data from the PhoneCopy server to your new iPhone.

Although PhoneCopy does a great job when it comes to transferring data between the phones from different platforms, the app comes with a few pros and cons which include:

Pros:

Registering and using PhoneCopy is free.

PhoneCopy can back up your calendar events, SMS, tasks, and notes and can help you import them on a different phone (typically on iPhone).

Cons:

Only up to 500 contacts, SMS, tasks, and notes can be synched while using the Basic version (free account) of PhoneCopy. To remove this restriction, you must buy the Premium version for which PhoneCopy charges $25 annually.

The archived data is auto-deleted from the PhoneCopy server after one month when using the Basic version, and after 1 year when using the Premium version.

Bonus Tip: Best Way to Transfer data between Android and iPhone

Dr.Fone - Phone Transfer lets you transfer data from Lava Blaze Curve 5G to iPhone or iPhone to Android in 1 Click. It supports almost all mobiles, including iPhone, Android Samsung, LG, Sony, HTC, etc. Dr.Fone - Phone Transfer can transfer music, videos, contacts, messages, call logs, and apps between mobiles. If you want to transfer data between Android and iPhone, it must be the best solution for you. Try it free. Follow the steps below to know how to transfer data between Android and iPhone.

Dr.Fone - Phone Transfer

Transfer Data between Android and iPhone in One Click.

• 1 CLick to transfer contacts from Lava Blaze Curve 5G to iPhone.
• Easily transfer photos, videos, calendar, contacts, messages, and music from Lava Blaze Curve 5G to iPhone/iPad.
• Works perfectly with Apple, Samsung, HTC, LG, Sony, Google, HUAWEI, Motorola, ZTE, Nokia, and more smartphones and tablets.
• Fully compatible with major providers like AT&T, Verizon, Sprint, and T-Mobile.
• Supports iPhone, iPad, iPod touch and the latest iOS version.
• Fully compatible with the latest Windows or Mac version.

3981454 people have downloaded it

Note: If you have no computer at hand, you can also get the Dr.Fone - Phone Transfer (mobile version) from Google Play, with which you could log into your iCloud account to download the data, or transfer from iPhone to Lava Blaze Curve 5G using an iPhone-to-Android adapter.

Step 1. Download Dr.Fone - Phone Transfer to transfer from Lava Blaze Curve 5G to iPhone

Launch Dr.Fone. You will see “Phone Transfer”. Click it.

Step 2. Connect Phones and select files

Connect your Android and iPhone. Dr.Fone will detect it soon. Then select the files and click Start Transfer. It can transfer almost all files, contacts, apps, messages, photos, music, videos, etc. If you just want to transfer contacts from Lava Blaze Curve 5G to iPhone, then it is also ok. Just check the Contacts option to transfer contacts from Lava Blaze Curve 5G to iPhone easily.

Conclusion

Regardless of the fact that many free solutions are there that can help you transfer data from your Lava Blaze Curve 5G to iPhone. If you also have an Android device, the Dr.Fone - Phone Transfer always has an upper hand when it comes to providing hassle-free migration between iPhone and Android devices.