Android to Apple: How To Transfer Photos From Motorola G24 Power to iPad Easily

If you are an Android user and have recently switched to an iPad, you might be wondering how to transfer photos from Motorola G24 Power to iPad. It is a common question that many people ask when they switch from one device to another. Fortunately, there are several ways to transfer photos from Motorola G24 Power to iPad easily. In this article, we will show you how to do it using different methods.

We are living in a world where capturing memories is at our fingertips, and the need to share photos across different devices is more prevalent than ever. Whether you’re looking to share your photos with friends or ensure a secure backup, transferring photos from your Android to your iPad shouldn’t be a hassle.

This article is your ultimate guide to executing photo transfer with no problems. We’ll walk you through the process of how to transfer photos from Motorola G24 Power to iPad as well as iPhone, highlight common mistakes to avoid, and make sure your cherished moments are transferred seamlessly.

Part 1. How Can I Transfer Photos From Motorola G24 Power to iPad Directly?

For a straightforward photo transfer from Motorola G24 Power to iPad, Apple’s Move to iOS app can be an excellent choice. It’s important to note, though, that your iPad must be in setup mode for this method to work. If it’s not in setup mode, you’ll need to perform a reset on your iPad before proceeding with the transfer.

How can I transfer photos from Motorola G24 Power to iPad? Follow the steps below.

Step 1: Set Up Your iPad.

As you set up your iPad, reach the “Apps & Data” screen and select “Move Data from Android.”

Step 2: Install and launch Move to iOS on your Motorola G24 Power.

Install Move to iOS and open the app on your Android. Review the terms and conditions and press “Agree” to proceed.

Step 3: Enter the code.

A six to ten-digit code will be displayed on your iPad screen. Enter this code when prompted on your Motorola G24 Power.

Step 4: Select photos to transfer.

In the Move to iOS app, choose “Photos” to transfer your images. Then, tap “Continue” to initiate the transfer process. Remember to keep your devices close to each other and connected to power until the transfer process is completed for quicker transfer.

Step 5: Transfer complete.

Allow the app to complete the transfer process. Once the transfer is complete, you will be prompted to finish setting up your iPad. Follow the instructions to complete the setup process.

Part 2. How to Transfer Photos from Motorola G24 Power to iPad Using Cloud Services (Google Drive)

In addition to dedicated apps like Move to iOS, you can also use cloud-based storage services such as Google Drive to transfer photos from Motorola G24 Power to iPad.

Because it’s stored in the cloud, you can find your photos from any device as long as there is an internet connection. Just upload your photos to Google Drive and later download them on your iPad. It’s also suitable for backup purposes. Google provides its users a 15 GB of free storage.

How to transfer photos from Motorola G24 Power to iPad with Google Drive:

Step 1: Upload photos to Google Drive.

Open Google Drive on your Motorola G24 Power, navigate to the “+” icon, and select “Upload.” Choose the photos you want to transfer and upload them to your Google Drive.

Step 2: Access Google Drive on iPad.

On your iPad, download and install Google Drive if you haven’t. Log in with the same Google account used on your Motorola G24 Power.

Step 3: Download Photos to iPad.

Locate the uploaded photos in Google Drive on your iPad. Tap on each photo or select multiple photos, then click download to save them directly to your iPad.

Part 3. How to Share Pics From iPhone to Android with Dr.Fone

In addition to transferring photos from Motorola G24 Power to iPad, you might also be interested in sharing pictures from iPhone to Android. Although both iPad and iPhone belong to the same Apple ecosystem, they function on slightly distinct operating systems— iPads utilize iPadOS, whereas iPhones operate on iOS.

For an efficient transfer of pictures from iPhone to Android, Wondershare Dr.Fone comes into play. This versatile tool features a dedicated Phone Transfer tool that enables comprehensive sharing of photos and other media content.

This method is particularly well-suited for streamlined bulk photo transfers, making it an ideal choice for individuals seeking a more encompassing solution for data transfer.

Dr.Fone Basic

Backup & Restore iOS Data Turns Flexible.

• One-click to back up the whole iOS device to your computer.
• Preview and selectively restore files to any device with simplicity.
• Export what you want from the backup to your computer.
• Your device’s data remains intact during the restore process.
• Supports iPhone, iPad, iPod touch, and the latest iOS version.

4,781,237 people have downloaded it

How to share pics from iPhone to Android with Dr.Fone Phone Transfer tool:

Step 1: Open Dr.Fone’s Phone Transfer tool

Make a connection between your iPhone and your Motorola G24 Power on your computer. Launch Wondershare Dr.Fone on your computer and navigate to Toolbox > Phone Transfer.

Step 2: Specify the source and destination devices

After connecting them, the platform will identify the connected devices and load their data. Choose iPhone as the source and Android as the destination device to set the transfer path. Use the Flip button to alter the transfer direction.

Step 3: Choose photos for the transfer

Proceed to select the types of data you wish to transfer. Checkmark photos and click the Start Transfer button. If you want to remove existing data from the destination device, you can select “Clear data before copy.”

Step 4: Disable iCloud syncing

Now, Dr. Fone’s Phone Transfer tool should prompt you to disable iCloud syncing. Follow the instructions.

Step 5: Monitor data transfer progress

The progress of the data transfer will be displayed in a pop-up window. Once completed, click OK to conclude the process.

Part 4. Mistakes to Avoid When Transferring Photos from Motorola G24 Power to iPad/iPhone

Transferring photos from your Motorola G24 Power to an iPad or iPhone holds the promise of seamless photo sharing. However, several factors can contribute to the failure of file transfer processes. To address them, it’s essential to navigate through common mistakes that users often encounter so you won’t make the same errors.

1. Insufficient battery levels

Users often attempt photo transfers with low battery levels on either device. For a successful process, it is crucial to make sure that both your Android and iPad/iPhone have sufficient battery levels or are connected to power sources during the transfer.

2. Limited storage space

Overlooking available storage space on the iPad/iPhone is a common oversight. To avoid transfer failures, check and clear sufficient space on your iPad/iPhone to accommodate the photos you intend to transfer.

3. Interference from Third-Party Apps:

Allowing interference from other apps during the transfer. Close unnecessary apps on both devices to prevent potential conflicts and ensure a smoother transfer process.

4. Ignoring file compatibility:

Apple and Android devices often have varying file compatibilities. For example, iPhones commonly employ the HEIC format, which may pose recognition challenges on Android devices. So, verify that the photo formats are compatible with both Android and iOS devices. If necessary, convert files to ensure a trouble-free transfer.

5. Skipping App Permissions:

When you use apps to transfer files, they usually ask for permission to access your media files. While it’s common for users to overlook this step or hesitate to do it, not granting access can actually lead to transfer failures. The app needs permission to access and transfer files securely.

Conclusion

Although they work in different operating systems, transferring photos between Android and Apple devices, including iPad and iPhone, can be accomplished through various methods. Apps like Move to iOS and Dr.Fone provide straightforward solutions, while cloud services like Google Drive offer convenient alternatives.

5 Techniques to Transfer Data from Motorola G24 Power to iPhone 15/14/13/12

It comes as no surprise that the new iPhone 15 series is turning heads and making a splash worldwide. Well, why not? These recently launched Apple devices are packed with highly advanced features that offer an unparalleled mobile experience to everyone. Among them are the USB-C port for faster charging and the improved A16 Bionic chip for smoother performance. Therefore, it’s fair to say that any model from the iPhone 15 catalog is worthy of ultimate consideration.

Switching to a brand-new smartphone requires plenty of work. You first need to set up the new device and configure your digital accounts. But with regard to data transfer and file synchronization, you don’t have to worry a lot. There are many ways you can try to quickly transfer data from Motorola G24 Power to iPhone 15.

In this article, we’ll talk about the essential factors involved in data migration of two devices with different operating systems. We will also provide a few tutorials on how to transfer data from Motorola G24 Power to iPhone 15 conveniently. Continue reading below to learn more.

Factors to Consider When Transferring Data From Motorola G24 Power to iPhone

It’s probably true to say that data migration is a major procedure. It’s not just a simple file-sharing method that can be completed in no time. A lot of things are involved when data is transferred from one device to another. To help you understand it better, below is a list of factors affecting the quality and speed of data migration.

File Size

The size of files being transferred affects the process in general. This is because the Motorola G24 Power device on the receiving end needs to allocate the data individually to the available space. That’s why the procedure often takes some time to complete if the volume of files is quite large. On the hand one hand, data migration gets completed in a snap if the file size is smaller.

File Type

The type of files involved in the data transfer is also a factor. Why so? The simplest explanation is that compatibility matters a lot in any form of file transfer. For instance, the procedure will likely fail if the receiver’s device does not support the data you’re trying to send. But don’t worry. There are lots of methods to transfer data from Motorola G24 Power to iPhone 15 if your first try doesn’t work out.

Device Storage

Device storage is definitely the first thing you should check before going ahead with the data transfer. It is important that the receiver’s device has adequate memory to accommodate the incoming files. Otherwise, the transfer will likely not push through.

Operating Systems

Migrating files between two smartphones with the same operating system is convenient. It’s because these two devices share an identical data-sharing structure. On the one hand, data migration between two smartphones with different operating systems is almost similar to the former. It’s just that the steps for the latter are quite longer. But don’t sweat it. There are many tutorials that can help you transfer data from Motorola G24 Power to iPhone 15 conveniently.

5 Various Ways to Transfer Data From Motorola G24 Power to iPhone 15

Sharing files between Android and iOS smartphones has become a lot easier today than ever before. In fact, you can actually complete the entire process in just a matter of minutes. No need for any advanced intervention or external assistance. Just initiate the specific technique that perfectly matches your circumstances. With that said, listed below are the top five methods to transfer data from Motorola G24 Power to iPhone 15.

Method 1: Transfer contacts from Motorola G24 Power to iPhone 15 using iCloud

Do you need to transfer contacts from Motorola G24 Power to iPhone 15? Well, you can easily do that by importing your Android contacts to iCloud. Don’t worry. The steps are very simple. Here’s how to do it quickly and easily.

• Step 1: On your Motorola G24 Power smartphone, go to the Contacts app.
• Step 2: Click Fix & Manage.

• Step 3: Click Export to File.

• Step 4: Choose the specific account that contains the contact list you want to export.
• Step 5: Then, click Save.

• Step 6: Launch the Browser app on your Motorola G24 Power smartphone.
• Step 7: Visit icloud.com and then log in to the iCloud account you’re currently using on your iPhone 15. From there, import the VCF file.

• Step 8: Once the contact list has been imported successfully, check the Contact app on your iPhone and then find the newly uploaded contacts.

Method 2: Transfer photos from Motorola G24 Power to iPhone 15 using Google Photos

Google Photos is not just a mere gallery application that allows users to view media files. It can also aid in the data migration between two devices since Google Photos stores the files online. Do you want to try it now? Here’s the guide on how to transfer data from Motorola G24 Power to iPhone 15 using Google Photos.

• Step 1: Go to the Google Photos application on your Motorola G24 Power smartphone.
• Step 2: Click your Profile icon at the top-right corner of your screen.

• Step 3: Click Back Up Now. At this point, Google Photos will back up your local photos to the Google servers.

• Step 4: On your iPhone, download and install the Google Photos application. Log in to the same Gmail account you use to back up the photos on your Motorola G24 Power device. From there, access the media files and save them to the local storage of your iPhone 15.

Method 3: Transfer emails and calendar details from Motorola G24 Power to iPhone 15 using Gmail

Do you use Gmail to manage your emails and organize your calendar appointments? If so, you can easily transfer data from Motorola G24 Power to iPhone 15 by simply syncing your Gmail account. Here’s a quick guide on how to do it.

• Step 1: Go to the Settings app on your iPhone 15.
• Step 2: Click Mail.

• Step 3: Click Accounts. Right after, click Add Account.
• Step 4: Select Google. From there, log in to your Gmail account.

• Step 5: Toggle on the radio button next to Mail and Calendar.

• Step 6: Check your Mail and Calendar applications. Find the Gmail data you’ve just synced.

Method 4: Transfer data from Motorola G24 Power to iPhone 15 using Move to iOS

Move to iOS is a mobile application that automates data migration between Android to iOS devices. It’s very simple to navigate and easy to use. In fact, you can complete the entire process within a few minutes. Here’s a short guide on how to transfer data from Motorola G24 Power to iPhone 15 using Move to iOS.

• Step 1: On your Motorola G24 Power, install the Move to iOS application from Google Playstore.
• Step 2: While the application is being downloaded on your Android smartphone, start setting up your new iPhone 15. On the App & Data screen, select Move Data From Android.

• Step 3: Get back to your Motorola G24 Power smartphone and then launch the newly installed Move to iOS application.
• Step 4: Read Apple’s Terms and Conditions. Right after, click Agree to proceed.
• Step 5: Click Continue.

• Step 6: On the Find Your Code page, click Continue to connect your Motorola G24 Power to your new iPhone 15.

• Step 7: Find the unique code displayed on your iPhone 15 screen. Then, enter it into your Motorola G24 Power smartphone.

• Step 8: Choose the files you want to transfer. After that, initiate the process. Wait until all the files have been transferred to your new iPhone 15.

Method 5: Transfer data from Motorola G24 Power to iPhone 15 using Wondershare Dr.Fone.

There’s no denying that the first four methods are all effective in this regard. But if you wish to opt for a more convenient option, Wondershare Dr.Fone can absolutely help you with that. It has a powerful data migration feature that can help you transfer data from Motorola G24 Power to iPhone 15. Here’s a short guide to get you started.

• Step 1: Download Wondershare Dr.Fone from its official website. Then, install it on your computer.
• Step 2: Launch the newly installed Wondershare Dr.Fone on your desktop. Once it fully loads up, connect your Motorola G24 Power and iPhone 15 using a data cable.
• Step 3: Go to the left-side panel and then click Toolbox. Choose Phone Transfer among the provided options on the main dashboard.

• Step 4: Wondershare Dr.Fone will then ask you to nominate a Source and a Target from your two mobile devices. Set the Motorola G24 Power as the former and the iPhone 15 as the latter. Alternatively, click the Flip button to modify the direction of the transfer based on your preference.

• Step 5: Select the specific categories of files you want to transfer. Right after, click Start Transfer to proceed.

• Step 6: Wait while Wondershare Dr.Fone is facilitating the transfer. If you wish to terminate the progress, simply click Cancel.

• Step 7: After completing the process, click OK to wrap it up. Check your files from their respective locations afterward.

How to Back Up Your Motorola G24 Power Before the Transfer

Data migration by means of the five methods enumerated above is considered safe and secure. However, it doesn’t mean that implementing preventive measures against data loss is no longer necessary. Backing up your device before any major procedure is still highly recommended. That’s why don’t initiate the phone transfer without backing up your files first. Below is the guide on how to back up files using Wondershare Dr.Fone.

• Step 1: Launch the Wondershare Dr.Fone application on your computer. Then, connect your Motorola G24 Power using a data cable.
• Step 2: Access the left-side panel and then click My Backup. On the main dashboard, click Back Up Now.

• Step 3: Follow the on-screen instructions for SMS backup. After that, click OK to proceed.

• Step 4: Wait while Wondershare Dr.Fone is backing up your files.

• Step 5: After completing the backup process, click View Backups or Open in Folder to check your files.

Conclusion

Data migration is the least of your concerns when switching to a new smartphone. Why so? The simplest explanation is that there are phone transfer methods to choose from. Big thanks to modern technology and digital advancements. Refer to the provided guide below if you need to transfer data from Motorola G24 Power to iPhone 15. One of them can help you a lot, depending on your current circumstances. Do you want a more convenient option? The phone transfer feature of Wondershare Dr.Fone is what you’re looking for. Download the application for free and take advantage of its all-in mobile solution features.

How to Transfer Contacts from Motorola G24 Power To Phone

When you get a new phone or switch between Android and iPhone, transferring contacts is essential. Moreover, to avoid losing your important contacts, you need some techniques to move them smoothly. The method you select has to transfer your contacts efficiently on a new device without losing information.

In this article, we will move you through various effective methods on how to copy contacts from phone to phone. Also, we have provided the best software that will assist you in transferring contacts securely. After that, you can seamlessly continue communication with your family, friends, and colleagues.

Part 1. One-Click Solution To Handle All Contacts Transfer Between iPhone and Android

Wondershare Dr.Fone – Phone Transfer offers a one-click solution to transfer all contacts between your smartphones. The tool has advanced features to move your device’s content in a few minutes. This aspect of the software helps users increase their productivity and easily handle their tasks.

Also, besides contacts, you can transfer other content from your old device to a new one. This Phone Transfer tool can transfer your contacts regardless of the operating system they are running on. You can easily transfer contacts from your iPhone and vice versa if you have an Android device.

Key Features of Wondershare Dr.Fone

1. The Phone Transfer tool of Dr.Fone supports all kinds of data files to transfer. It allows more than 12 types of files, including Photos, Videos, Bookmarks, Voice Memos, and more.
2. This software provides easy navigation so that even a layman can operate the software with a one-click solution.
3. The transfer speed of Dr.Fone’s Phone Transfer tool is the lowest among other transfer methods. Within 3 minutes, all of your content can be transferred to another device.

Guide To Move Contacts Between iPhone and Android Using Wondershare Dr.Fone

This software will require a few steps to transfer your contacts to another device. Here is the answer in a step-wise manner to your “how do I transfer contacts from phone to phone“ question. Moreover, this toolkit can work in all directions, such as from one iPhone to another or from an old Android smartphone to a new one.

• Step 1. Open Dr.Fone to Transfer Your Contacts

First, you have to activate Wondershare Dr.Fone on your computer and navigate to the “Toolbox” section. In that section, you have to select the “Phone Transfer” tool to proceed further.

• Step 2. Designate the “Source” and “Destination” Devices

Here, you need to set “Source” and “Destination” devices. In either case, you must set the Motorola G24 Power device as a source from which you want to transfer the contacts. Moreover, you can also use the “Flip” button to change the transfer direction between the Motorola G24 Power devices.

• Step 3. Select the “Contacts” Option for their Transfer

Now, select the type of data you want to transfer, which, in your case, is “Contacts.” Checkmark the “Contacts” option, and click the “Start Transfer” button to begin the transfer. Now, you can monitor the progress of the contacts transfer in a new window.

• Step 4. Finalize the Contact Transfer Process

After you turn off iCloud syncing on your iOS device, a notification will indicate the successful execution of the process once it is complete. Tap the “OK” button to close the window promptly.

Part 2. 2 Methods To Transfer Contacts From iPhone to iPhone

Although Wondershare Dr.Fone is the perfect solution to transfer your contacts, we’ll consider various scenarios in which you can transfer contacts. Now, if you have an iPhone and want to know how to copy contacts from phone to phone, you can adopt the following two methods:

Method 1. Use NameDrop

Apple has introduced a new feature in the latest iPhones named NameDrop. The feature allows you to share your contact card with another person by tapping the two iPhones together. The step-by-step guide to move contacts between iPhone and iPhone using “NameDrop” is below.

• Step 1. Start by holding your iPhone’s display a few centimeters from the top of the other person’s iPhone. Keep both devices close until “NameDrop” appears on both screens.

• Step 2. Afterward,you have to select whether to “Share” your contact card and receive the contact of another person. Or tap “Receive Only” to receive another person’s contact information.

• Step 3. If you want to share your contact card, tap the “ Downward Arrow” icon, choose the fields you wish to include, and then share it.

Method 2. iCloud Sync

The alternate method to transfer your phone contacts is via iCloud synchronization. The technique involves your iCloud contacts option to be toggled on. You can sign in with the same iCloud account to transfer the contact list to your new iPhone. Here’s how to transfer contacts from iPhone to iPhone using iCloud Sync:

• Step 1. First, you need to access the “Settings” of your old iPhone and tap on the “Apple ID” on the top. There, continue with the “iCloud” option and tap on “Show All” to display all features.

• Step 2. Next, you can see the “Contacts” option; toggle on the switch to synchronize them. When you sign in with your iCloud account on the new iPhone, contacts will be restored there.

Part 3. 2 Methods To Transfer Contacts From Motorola G24 Power to iPhone

Let’s discuss another scenario in which we will transfer the contact list from an Android to an iPhone. If you want to switch from Motorola G24 Power to a new iPhone, you will probably need an effective method to transfer your phone numbers. In this section, we will discuss two simple and quick ways to how do I transfer contacts from phone to phone:

Method 1. Sync Google Account

Android users can back up their phone’s data to Google Drive. Also, an Android phone’s “Google Contacts” app saves the contact information to their linked Google account. The same account can be logged in a new iPhone, where they can be restored. Follow the simple guide to sync your Google account with the updated contact information:

• Step 1. First, open the “Google Contacts” app on your Motorola G24 Power and tap the “Profile” icon at the top right corner. Following this, head to the “Contacts settings” and choose the “Google Contacts sync settings” option.

• Step 2. Next, choose the “Also sync device contacts” option at the top of the screen and ensure that the “Automatically back up & sync device contacts” feature is turned on. Afterward, switch to your iPhone and open the “Settings” app.

• Step 3. Subsequently, navigate to the “Contacts” settings within your iPhone’s “Settings” app. Here, find and select the “Accounts” option and proceed to the next step.

• Step 4. As you lead to the next window, tap the “Add Account” option. You have to sign in with your Google Account and ensure that the “Contacts” option is enabled.

Method 2. Use the VCF File

This method simplifies transferring contacts from Motorola G24 Power to iPhone without requiring additional software or complex procedures. Also, it maintains contact details and facilitates a smooth transfer between devices. You can follow these steps to import a VCF file in which your contacts are saved.

• Step 1. Start by opening the “Contacts” app on your Motorola G24 Power. Choose the “Select all” option to select all contacts and tap the “Share” icon. You can choose any sharing method, but we’ll use Gmail to send the VCF file in this case.

• Step 2. Now, on your iPhone, you need to open the email containing the “Contacts VCF” file from your Motorola G24 Power. Tap to open the attached file and choose the “arrow” icon on the top to select the “Share” option. Next, choose the “Contacts” app and tap the “Add All Contacts” option to save contacts on your iPhone.

Part 4. 2 Methods To Transfer Contacts from Motorola G24 Power to Other Android Devices

This section will shed some light on the transfer process of contacts between one Android phone to another. Android devices offer various options to share content with another Android device. You can send contact lists and achieve how to copy contacts from phone to phone with these two methods:

Method 1. Nearby Share

Nearby Share is a feature available on Android devices that allows you to easily share various types of content, including contacts. You have to ensure that both devices have Bluetooth and Location Services turned on. That’s because Nearby Share uses these services to find nearby devices and establish a connection for sharing content.

• Step 1. To begin, navigate to the “Settings” of your Motorola G24 Power and tap on the “Google” option. Then, proceed with “Devices and Sharing,” followed by switching on the “Nearby Share” feature.

• Step 2. As you proceed into the “Nearby Share” option, you have to turn on the “Device visibility” toggle. This will enable Nearby Share on your Android smartphone.

• Step 3. Now, you have to open the “Google Contacts” app on your Motorola G24 Power and access the “Fix & manage” tab. Choose the “Export to file” option and select the Motorola G24 Power device and account from which you want to share contacts. After making the selection, hit the “Export” button and save the file within your device.

• Step 3. Continue by locating the saved contacts file, then tap on it, and choose the “Send” option. Next, from the available sharing options, select “Nearby Share.” Lastly, you have to locate and select the name of your target Android device when it becomes visible and tap to accept the file share on your destination device.

Method 2. Use Google Account

The Google account transfer method can also transfer between Android and Android devices. You just have to ensure that the contacts synchronization is turned on. You can follow these steps to handle your “How do I transfer contacts from phone to phone” question.

• Step 1. First, create a backup on your previous Android phone. For this, you need to access “Settings” on your phone and tap the “Accounts & Sync” option. Then, select “Google” and enable the “Contacts” option to allow the syncing process to complete.

• Step 2. In the next step, navigate to “Settings” of your new Android device and tap “Accounts & Sync.” Afterward, log in using your Google account credentials and select the “Sync Now” feature within the “More” option. This will import the synced contacts to your new Android device.

Part 5. 2 Methods To Transfer Contacts From iPhone to Android

This section will discuss two methods to transfer contacts from an iPhone to an Android. Similarly, in this iPhone-to-Android transfer case, the iPhone synchronization method and importing VCF file method can be used to move your contact list.

Method 1. Enable iPhone Sync Feature

You can enable the iPhone Sync feature to transfer contacts from an iPhone to an Android device. In this case, ensure the contacts option in the Gmail synchronization is toggled on. Later, the contacts are saved when you sign in with the same Google account on your Motorola G24 Power. Let’s learn how to transfer from phone to phone using this feature:

• Step 1. Access the “Settings” app on your iPhone and navigate to the “Contacts” settings. Then, tap on “Accounts” and choose your Gmail account. Turn on the “Contacts” toggle switch to synchronize them.

Note: You can select “Add Account,” tap “Google,” and input your credentials if your account has not been added yet.

• Step 2. Now, you have to install or access the “Google One” app on your Motorola G24 Power. Sign in and configure your Google One settings. Then, navigate to the “Sync” section and tap the “View” option.

• Step 3. There, you need to select the “Contacts” option and click “Set up Sync.” Next, proceed to the “Upload Contacts” option.Subsequently, contacts will sync to your Motorola G24 Power.

Method 2. Import the VCF File

Importing a VCF file is another simple method for transferring contacts. It includes a vCard creation, in which contacts are saved. Then, this card can be downloaded from an iCloud account and imported to your Motorola G24 Power. Moreover, this simple process does not involve any complicated steps to implement it. You can import a VCF file by following these simple steps.

• Step 1. At first, you will have to access “Settings” on your iPhone and tap your “Profile” icon at the top. After that, tap “iCloud,” followed by the “Show All” option. Then,you need to toggle the “Contacts” switch to turn it on.

• Step 2. Now,on your Motorola G24 Power, open “Chrome” browser and navigate to the “iCloud” site. Then, sign in to your iCloud account and tap the “Three Dots” icon in the browser. Afterward, select the “Desktop site” option among various other options.

• Step 3. Now, choose “Contacts” on the iCloud website, tap the “Three Dots” icon, and proceed with the “Select All” option. After that, you can tap the “Share” icon to choose the “Export vCard” feature. Subsequently, you need to open the exported file and select your Google account to import the contacts to your Motorola G24 Power.

Conclusion

We have discussed various scenarios on how to copy contacts from phone to phone, whether the Motorola G24 Power devices are Android or iPhone. Nonetheless, Wondershare Dr.Fone - Phone Transfer stands out as the perfect method. This software provides a one-click and swift solution to all your transfer processes, including the contacts. Moreover, Dr.Fone can deal with all types of phone transfers, such as iPhone to iPhone, Android to iPhone, iPhone to Android, and Android to Android.