How to Transfer Contacts from Samsung Galaxy XCover 7 to Other Android Devices Using Bluetooth?

One of the first and the most important things people care about while upgrading their phones today is how to transfer contacts from one phone to another phone. 2022 has just begun, new devices from smartphone companies are coming in and one of the most anticipated of them is Samsung Galaxy S22 series that is rumored to launch just this February. For some, the upgrade fever is coming on! And, it pays to be prepared in advance. If you are going to be upgrading your old Android to one of the fancy new Android smartphones soon, you are in the right place. You will learn how to transfer contacts from the old device to the new one easily and smoothly.

Click here

## Part I: How to Transfer Contacts from Samsung Galaxy XCover 7 to Other Android Devices via Bluetooth?

This method works if you are not trading in your old smartphone to offset the cost of the new, as to transfer contacts from one Android smartphone to another using Bluetooth you will require both devices present and in close proximity, a few feet away at best. There are advantages to transferring contacts using Bluetooth, such as no need for using the internet, going through any other hoops, or opening special apps! Everything you need to share contacts from one Android phone to another is built right into your phone! Now, to transfer contacts from one Android smartphone to another using Bluetooth, you must first pair the two devices together so as to allow for seamless contacts transfer.

I.I: Pairing Two Android Devices Together

Here’s how to pair your old and new phone together via Bluetooth:

Step 1: On your old and new devices, go to Settings, then Bluetooth

Step 2: Make sure Bluetooth is “On” on both of them

Step 3: If everything is done correctly, both devices will show themselves to each other

Step 4: Tap the other device on either of them. Here, the Moto G4 Play was tapped on OnePlus Nord 2:

Step 5: A prompt to pair with the new phone will come on the other device as well. For your device, make sure that the PIN is the same on both devices to ensure the security of the connection. This PIN is generated afresh and is unique, so the PIN in the image is not the PIN you will see on your devices. Tap Pair on your old device to pair the two devices together using Bluetooth.

Step 6: After pairing is complete, both devices will show under paired devices on each other:

And that’s how simple it is to pair devices to each other using Bluetooth!

I.II: Transfer Contacts from One Android Smartphone to Another Using Bluetooth

Here is how to transfer contacts from one Android to another, easily, using Bluetooth:

Step 1: Go to Phone on your old phone and select the Contacts tab

Step 2: Tap the vertical ellipses and select Import/ Export.

This particular option can vary by your phone model and Android flavor, this is on Android 7 running on Motorola G4 Play. If you are unable to find a way to select contacts or share contacts in the Phone app on your phone, use the Contacts app on your phone for the same effect.

Step 3: A popup will emerge:

Select Share All Contacts.

Step 4: When you do that, this will come up:

Select Bluetooth in the Share With menu. You may select Always or Just Once and proceed.

Step 5: Choose the paired handset, in this case, the OnePlus Nord 2:

Step 6: The VCF file will be exported to Nord 2 and you can accept it on the Nord 2 (new device).

And that is how to transfer contacts from an Android smartphone to another using Bluetooth!

Part II: Other Methods to Transfer Contacts from Samsung Galaxy XCover 7 to Other Android Devices

What are other ways to transfer contacts from one Android smartphone to another? Glad you asked. Because there are other ways to transfer contacts from an Android smartphone to another that do not use Bluetooth and can be both seamless and more powerful than the Bluetooth method, depending on your tastes and needs.

II.I: Sync Contacts Using Google Account

This is another method to transfer your contacts on one Android device and restore them on another Android device. Here’s how to transfer contacts from one Android smartphone to another using Google Sync:

Step 1: Go to Settings on your old device

Step 2: Tap Accounts

Step 3: Tap the account you want to transfer contacts from

Step 4: Make sure that there is a checkmark next to Contacts, or, in other words, Contacts sync is enabled/ toggled.

Now, Google will sync your contacts from the Samsung Galaxy XCover 7 device onto the cloud, and your new device signed into the same Google Account will automatically download the contacts.

II.II: Transfer Contacts from An Android Smartphone To Another Using Manufacturer Apps

Now, if you have an LG phone, you might be more willing to use LG apps than, say, Xiaomi apps. Same for Xiaomi users who would probably scoff at using Samsung apps on their beloved Xiaomi devices. Manufacturers provide apps on Google Play Store that make transferring content from another device to their devices easy because that suits them to make the processes as seamless and easy for their customers. Even Apple is no different in that regard, they have an app to make it easy for people to switch from Samsung Galaxy XCover 7 to iOS.

There are apps by most major manufacturers like Samsung and Xiaomi, including the older titans such as LG that have now stopped manufacturing phones recently. More or less, the steps that users would need to take to transfer contacts from their old devices to the new are fairly common, and you can use the app for your manufacturers, such as Mi Mover for Xiaomi and Samsung Smart Switch. Here is how to transfer contacts from old Android to new Samsung devices using Samsung Smart Switch.

Step 1: Download Samsung Smart Switch on both your old Android and the new Samsung device

Step 2: Keep the Samsung Galaxy XCover 7 devices close by, say, on the table. This will not work if the Samsung Galaxy XCover 7 devices are in different rooms or too far away.

Step 3: Launch Smart Switch on both the Samsung Galaxy XCover 7 devices

Step 4: Tap Send Data on old Android

Step 5: Tap Receive Data on the new Samsung device

Step 6: Tap Wireless method on both devices

Step 7: Tap Allow on your old device to start the transfer process. Don’t worry, this will not dump all your content just yet.

Step 8: On your new Samsung device, choose what you want to transfer - Contacts, in this case.

Step 9: Tap Transfer and when the transfer is done, tap Close.

That’s all it takes to transfer contacts from old phone to new using Samsung Smart Switch. The process is fairly similar for all other apps from manufacturers. You tap Send on the old device, tap Receive on the new device, choose what you want to receive, and that’s it.

Limitations Of App-based Transfer Methods

It must be noted that there is one binding limitation with such apps - these apps are not two-way streets. You cannot use Samsung Switch to transfer contacts from Samsung phones to another manufacturer’s phones. The same goes for all other manufacturers. All of them allow data into their devices, not out of their devices onto another manufacturer’s devices, using their apps.

In that regard, using a third-party solution such as Dr.Fone allows you complete freedom to do whatever you want and whenever you want, and even so, Dr.Fone is a great tool to have in one’s arsenal to use every day. How? Because not only does Dr.Fone allow you to transfer contacts from one Android device to another, you have complete freedom to mix the Samsung Galaxy XCover 7 devices in all possible ways. So, if you want to transfer from Samsung to Xiaomi, you can do that. You want to transfer from Xiaomi to Samsung, Dr.Fone does that. Transfer from Apple iPhone to Xiaomi? Yes! Xiaomi or Samsung to Apple iPhone? You bet, all supported! And with a clean, easy-to-use interface that does the job quickly and safely.

II.III: Transfer Contacts from Samsung Galaxy XCover 7 to Other Android Devices Using Dr.Fone - Phone Transfer

Video Tutorial: How to Transfer Data from Samsung Galaxy XCover 7 to Other Android Devices

Now, how about a method that frees you from all limitations and any possible hiccups you might encounter with the previous methods? Yes, that is what Dr.Fone promises.

Dr.Fone is a set of modules that specialize in particular tasks that users need to perform with their phones. Phone Transfer is one such module that helps users to easily and quickly transfer contacts and other data from any smartphone to any other smartphone. That means you only need one Dr.Fone to transfer from iPhone to Samsung, Xiaomi to Samsung, LG to Xiaomi, Samsung to Oppo, the combinations are endless since Dr.Fone does not limit you in any way!

Here’s how to transfer contacts from, say, an iPhone to an Android device using Dr.Fone:

Step 1: Download Dr.Fone

Try It Free Try It Free

Step 2: Launch Dr.Fone

Step 3: Select the Phone Transfer module and connect your Samsung Galaxy XCover 7s to the computer

Step 4: When the Samsung Galaxy XCover 7 devices are connected, select the Contacts category to transfer and click Start Transfer. Within seconds, your contacts will be transferred to the new device.

That’s it! It is that easy. Connect your devices, select what to transfer, click Start Transfer, and boom! You’re good to go. If you are thinking about WhatsApp chats, that is handled easily, too, using the WhatsApp Transfer module. You’re going to have a wide smile plastered all over your face when you try this and experience how seamless and easy this is, everything integrated into one easy-to-use app called Dr.Fone.

Try It Free Try It Free

Transferring contacts from one Android to another Android can be done in two broad ways. One is to transfer contacts from an Android smartphone to another using Bluetooth, which means you can transfer between any smartphone easily and whenever you wish to, without limitations such as which manufacturer the smartphone belongs to. But, how about some more control over what you transfer? If you do not want to use Bluetooth, there is the other way to simply enable Sync in your Google Account, post which your contacts will be uploaded to your Google Account and downloaded to your other device. Or, when you want to do more than transfer, or when you want to have the convenience of doing things from your computer, you have a third way, where you can use Dr.Fone with the Phone Transfer module that lets you select what to transfer, and importantly, lets you transfer between manufacturers easily. So you want to transfer from Samsung Galaxy XCover 7 to iPhone, you can do that. You want to transfer from an Android smartphone to another, you can do that. You want to transfer contacts and other data from one manufacturer to another, you can do that. All in just three steps - connect, select, click.

How to Transfer Photos from Samsung Galaxy XCover 7 to New Android?

The phone industry, for years, has constantly improved on the design and development of mobile phones being released into the market. One of the major developments is the introduction of the camera to mobile phones. The ease of carriage and portability has made mobile phone cameras a preference over digital cameras. As a result we are witnessing more pictures taken with the aid of a phone. This also means most of these photos are stored on the phone memory.

Most of these photos would need to be shared with other people who are either a part of the photo or you would want to transfer them to your new android device. Most users are at a loss about how to transfer their photos from one android device to another. There are several ways to do that successfully without the risk of losing your priced photos. And in this article we have outlined several ways through which you can transfer your photos from your Samsung Galaxy XCover 7 to your new android device.

Part 1. Transfer Photos from Samsung Galaxy XCover 7 to New Android with a File Transfer Software

One way of moving your photos between android devices is through the use of file transfer software. This software enables you to connect both android devices together.

Using file transfer software to move your photos from one android device to another android device provides a secure and sure transfer window, ensuring your files won’t be lost. Reliable software you can use for this purpose is the Dr.Fone - Phone Transfer software. Dr.Fone - Phone Transfer file transfer software is topnotch and user friendly. This article will carefully lead you through the process of using this software.

Dr.Fone - Phone Transfer

Transfer Everything from Android/iPhone to New iPhone in 1 Click.

• It supports all the leading iOS devices, including devices running on iOS 11.
• The tool can transfer your photos, videos, contacts, messages, music, call logs, notes, bookmarks, and so much more.
• You can transfer all your data or select the type of content you wish to move.
• It is compatible with Android devices as well. This means you can easily perform a cross-platform transfer (e.g. iOS to Android).
• Extremely user-friendly and fast, it provides a one-click solution

3981454 people have downloaded it

Ensure you have a good PC where you would download and install the Dr.Fone software. When the software has installed, go to desktop home screen and double click on the icon. You can follow the steps below to start a file transfer.

Step 1. Click on “Switch” module after you open Dr.Fone toolkit

Step 2. Connect both phones to PC and select “Photos”

Using a good USB cable, connect both old and new devices to your PC. When that is done, a list of data that can be transferred will appear. Choose “Photos” and this will move your photos from the source device to the destination device. You can also change both device between “source” and “Destination” by using the “Flip” button.

Step 3. Click “Start Transfer”

Click on the button “Start Transfer”. Keep phones connected. Dr.Fone starts to transfer photos. Go to view trabsferred photos on the destination phone until it completes.

Part 2. How to Transfer Photos from Samsung Galaxy XCover 7 to New Android Using NFC

Near Field Communication(NFC) is a technology that supports Android Beam and is ideal for transferring data between android devices by just pressing their backs together. It is a fast and simple program that requires both devices to NFC-capable. This means they are able to communicate with each other when their fields are near. This communication is made possible through radio frequencies. Most devices have NFC hardware integrated underneath their panel.

NFC can be found in almost every android device. In the past, it was easy to identify devices with NFC as such devices usually had NFC printed somewhere in the back of the Samsung Galaxy XCover 7 devices, most tines on the battery pack. But since most android devices don’t have a removable back, there is an alternative to checking if your device is NFC enabled.

1. On your Samsung Galaxy XCover 7, tap on “Settings” and click on “More” located under “Wireless and Networks” .

This would take you to a screen where you should find the NFC and android beam options as depicted in the image below. At this stage enable both options if any or both have been disabled. If the NFC option doesn’t appear, it then means your device does not have Near Field Communication (NFC) functionality.

2. Another method of checking is by opening settings menu and tapping on the search icon. Type in “NFC”. If your phone is capable, it will show up. The NFC function works hand-in-hand with the android beam. NFC may not work at optimal levels if android beam is “off”.

To Transfer Photos from your Samsung Galaxy XCover 7 to a new android device, ensure both devices support NFC using the method explained above. Once this is confirmed, use Android beam to access the photos you want to transfer to your new android device.

1. To select multiple photos, long press on a photo. Then choose the photos you want to transfer to new android device. When you are done selecting, you can begin the beaming process.

2. Next, place both devices against each other, back to back.

3. At this stage, both an audio sound and visual message will appear, acting as confirmation that both devices have found each other’s radio waves.

4. Now, on your Samsung Galaxy XCover 7, the screen will reduce to a thumbnail and a “Touch to beam” message will pop up at the top.

To begin beaming, you must touch the screen on your Samsung Galaxy XCover 7 from where the photos are been sent. A sound will alert you that beaming has started.

To ensure a successful transfer, make sure devices are not locked neither should the screen be turned off. Also both devices should be kept back-to-back throughout the duration of the transfer.

5. Finally, when the beaming is complete, you will hear an audio sound. This is to confirm completion of the process. Alternatively, instead of an audio confirmation, the application on your new android device to which the photos were sent will automatically launch and display the beamed content.

Part 3. Transfer Photos between Android Phones by Bluetooth

The Presence of Bluetooth technology in phones is as old as android itself. The use of this technology offers another method that you can employ in transferring your photos from your Samsung Galaxy XCover 7 to your new android device. It is a short and simple method that is known to most android users.

The purpose of this article is to guide you through the process of successfully transferring your photos from your Samsung Galaxy XCover 7 to your new android device. This process involves navigating to the Bluetooth option on your device, connecting to your new device and initiating transfer. The steps are outlined below

1. Locate the Bluetooth on both devices. Go to your Settings and click on the “Connected device “Option. Under that option, you will find Bluetooth, click on it and toggle it on. Do the same for the receiving device.

2. Your device will start searching for nearby visible devices to pair with. Make Sure your new android device is visible to other devices. When your android device appears on the list of available devices on your old Android, select it to pair.

A message will pop up on your new android device, requesting permission to pair with your Samsung Galaxy XCover 7. Click “Accept “to establish connection.

3. After both devices have successfully been paired to each other, go to the folder containing the Photos your want to send to your new Android device. Select the photo or if they are more than one, long press on a photo. This will create a thumbnail. Select the photos you want to transfer and choose the share button normally depicted by this icon

4. A list of option will appear. Choose Bluetooth. This will take you back to The Bluetooth application. Click on your new android device that you have previously paired with. A Message will appear on your new device asking for permission to receive the photos from your Samsung Galaxy XCover 7. Click “Accept”. This will initiate the transfer process. A progress bar at the top of your screen will show you the Progress of each transfer.

Part 4. Transfer Photos from Old to New Android Phones via Device-Specific App

Samsung Smart Switch

The Samsung smart switch software helps to Transfer Photos either by cable or wireless transfer If your Samsung device does not come with the software, you can download it here .

1. Open the switch app on both Samsung devices. On the sending device, tap “Send data” and on the receiving device, tap “Receive data”.

2. Now, choose either the Cable option using an OTG adapter or wireless transfer option.

3. On the old Samsung device, select the data to be transferred to the new Samsung device. When you are done with this, your phone will notify the size and time length of the transfer.

4. Thereafter, click on “Send” to begin the transfer of data from on device to the other.

LG Mobile Switch

LG’s mobile switch software is device specific software that allows for data transfer. Follow the steps below.

1. Switch on your LG device. On the home screen, swipe left. Click on Management and tap “LG Mobile Switch”. Select the data to be transferred and tap on “agree”. A list of options will appear on how to transfer the data; select “Wireless” and tap receive. On the screen that comes up next, tap on “Start”.

2. Now go to your old LG device and open the software. Click on “Send Data” and choose “send data wirelessly”. Next, tap “tap start” and choose the name of your new phone. Then click on “accept” and on the new device, tap on “receive”. Select the data to be sent and tap “Next”. This will start the transfer. When it is completed, the data would have been transferred from your old android to the new android.

Huawei Backup

Huawei devices have HiSuite, an inbuilt manager tool. This app helps users to manage the data on their Huawei devices and also to back up and restore data. To backup and restore on Huawei devices using Hisuite, follow the steps below

1. Download the tool here and install. This tool is supported by windows only. Then, open the tool and connect your Huawei device to you PC by means of a USB cable.

2. Go to settings app on your android device and click on “advanced settings”. Click on “security” and choose “Allow Hisuite to use HDB”. You will see the “Back Up” and “Restore” options. Click on “Back Up” and select the data you want to back up. You can encrypt your backup with a password. Then click on “Back Up”.

3. Click on “Restore” to retrieve data from previous backups after selecting the backup file you want.

How to Transfer Photos from Samsung Galaxy XCover 7 to Laptop Without USB

Moving your photos on a computer comes with lots of benefits. Among them is the larger screen itself, which allows you to inspect the image details in a more thorough manner. Another thing is that the computer also serves as a great backup storage for your dearly cherished photos. You can be sure that the image folders you create in the computer’s local memory are highly secure. Just organize each file with labels to avoid unnecessary confusion. Simply put, our computers have a lot to offer with regard to file organization and data management.

Many people assume that copying your files to a computer is a bit of a hassle. Well, it’s somewhat true unless you’re going to opt for wireless data transfer. Yes. That’s possible. There are many tutorials out there on how to copy files from your phone to your laptop without USB. Simply choose a particular method that works best in your situation.

In this article, we will provide a short guide on how to organize your computer files easily and quickly. We will also list down a few tutorials on how to transfer photos from your phone to your laptop without USB. Continue reading below to learn more.

How to Organize the Photos on Your Computer

While smartphones offer convenience for snapping photos on the go, viewing your pictures is doubtlessly much better on a computer. Why not? Computers apparently have larger screens that increase image quality to another level. However, finding a specific photo in your desktop storage can be a daunting experience if your files are unorganized. Don’t worry. Listed below are some useful organization techniques that can help you a lot in this regard.

Add the Image Folders to the Photos Application

Many operating systems have a built-in Photos application to help you organize and view your pictures more efficiently. You may use it to organize your photos in separate folders and create a centralized hub for browsing.

Add Tags to Your Photos

Tagging your photos is a versatile way to categorize and organize them based on themes, events, or people. Most photo management applications allow you to add descriptive tags that make it easy to search the media files later. This is particularly useful for quickly locating pictures of specific occasions or individuals.

Keep Your Photos in Separate Folders

Make it a habit to create separate folders for different events, locations, or time periods. This organization method helps you maintain a clear structure for your photo collection. For example, you might have folders for vacations, family gatherings, or special occasions. Organizing photos this way simplifies navigation and ensures that each set of pictures is kept properly.

Rename Your Photo

Give your photos descriptive and unique filenames that reflect either their content or context. Organizing your files by their respective labels helps you find them easily instead of relying solely on visual cues. Consider including dates, locations, or key details in the filenames to make your photos easily identifiable.

NOTE: By incorporating these organization techniques, you can surely enjoy your memory collection on the larger canvas of your computer screen. Take advantage of these methods to transform your digital photo library into a well-ordered and easily accessible archive. Moreover, these are prerequisites for the tutorials on how to transfer photos from your phone to your laptop without USB.

How to Transfer Photos From Phone to Laptop Without USB in Easy Steps

Copying photos from smartphones to laptops has become significantly more straightforward today than in the past. In fact, the entire data migration process can be completed within a few minutes. No need to resort to advanced interventions and external assistance. Just choose a particular tutorial below on how to transfer photos from your phone to your laptop without USB. Initiate each step carefully and complete the procedure in no time. Check out the list below to get started.

Method 1: Transfer photos from phone to laptop using iCloud web

If you’re an Apple user, you can easily transfer photos from your phone to your computer via iCloud. Don’t worry. It’s a very simple data transfer procedure you can definitely complete with little to no effort. Here’s a short guide on how to transfer photos from your phone to your laptop without USB using iCloud.

• Step 1: First and foremost, make sure that your iPhone is syncing your photos to iCloud. To check it, go to Settings > Apple ID > iCloud > Photos. Toggle on the radio button next to Sync This iPhone.

• Step 2: On your computer, launch the Browser.
• Step 3: Visit icloud.com. Once it fully loads up, click Sign In. Log in to the Apple ID account you’re currently using on your iPhone.

• Step 4: Click on the Photos icon.

• Step 5: Select the photos you want to transfer to your computer. After that, click the Download icon at the top-right corner of your screen.

NOTE: How to transfer videos from your phone to your laptop without USB? This data migration technique also works in this regard.

Method 2: Transfer photos from phone to laptop using Google Photos

Google Photos is simply the iCloud’s substitute for Android smartphone. Like iCloud, you can sync your Android photos to Google Photos and access them from your computer. Don’t worry. It’s very easy to facilitate. Here’s how to transfer photos from your phone to your laptop without USB using Google Photos.

• Step 1: Before anything else, back up your Android smartphone first to Google Photos. Go to Google Photos > Profile icon > Turn On Backup. Once enabled, Google Photos will copy your photos from the local storage to the Google server.

• Step 2: Launch the Browser on your computer. Go to google.com.
• Step 3: Click the Nine-dotted menu icon next to your profile. Make sure that you’re logged in to the same Gmail account you’re currently using on your smartphone.
• Step 4: Choose Photos.

• Step 5: Click the images you want to save on your computer. From there, click the Three-dotted menu icon. Find and click Download or press SHIFT + D on your keyboard.

NOTE: How to transfer videos from your phone to your laptop without USB? This data migration technique also works in this regard.

Method 3: Transfer photos from phone to laptop using Bluetooth

Does your laptop have a Bluetooth connectivity feature? If so, try to use it for the photo transfer. Just connect your smartphone to the computer via Bluetooth and go ahead with the migration. Here’s a short guide on how to transfer photos from your phone to your laptop without USB via Bluetooth.

• Step 1: Turn on the Bluetooth connection on your smartphone and your computer.
• Step 2: On your smartphone, select the photos you want to transfer. Click on it.
• Step 3: Click Share.

• Step 4: Click Bluetooth. Select your computer from the list. Then, click on it. Wait for the transfer to be completed in a few seconds.

Method 4: Email the photos from the phone to the laptop

If you’re only sending a few photos to your laptop, emailing them from your smartphone will certainly work great. Here’s how to transfer photos from your phone to your laptop without USB via email.

• Step 1: Launch the Gmail application on your smartphone. From there, click Compose.
• Step 2: Key in the recipient’s email address to the To field. Make sure that it is currently logged in to the browser on your computer.
• Step 3: Click the Attachment icon on the top-right corner of your screen. After that, choose the photos you want to transfer.
• Step 4: Click the Send button.
• Step 5: On your computer, launch the browser and sign in to the Gmail account delegated as the receiver of the transfer.
• Step 6: Find and click the Email to view them. From there, hover the mouse cursor over the photo attachment you want to download. Lastly, click the Download icon.

NOTE: How to copy files from your phone to your laptop without USB? This data migration technique also works in this regard.

Method 5: Transfer photos from phone to laptop using AirDrop

Are you using an iPhone and a Macbook? No problem. You may use AirDrop to move your photos between these two devices. Here’s a short guide on how to transfer photos from your phone to your computer without USB via AirDrop.

• Step 1: Activate AirDrop on your iPhone and Macbook.
• Step 2: On your iPhone, go to the Photos application.
• Step 3: Choose the media files you want to transfer. After that, click the Share icon at the bottom-left corner of your screen.
• Step 4: Choose AirDrop.

• Step 5: Select your Macbook as the recipient.
• Step 6: On your Macbook, click Accept.

BONUS TIP: How to Copy Files From One Smartphone to Another?

As a bonus, it is important to know that transferring files from one device to another in a secure environment is significant. It safely copies the documents and lowers the risk of data loss and corruption.

With the holidays fast approaching and the abundance of noteworthy photos, videos, and moments coming your way, having a steadfast solution is crucial. This is where Wondershare brings a compact yet efficient tool to help you. Wondershare Dr.Fone lets you quickly transfer photos and files to another mobile device in no time. To back this up, here is a quick, comprehensive guide on how to do it in a few simple steps.

Suppose you’re upgrading to an IOS device and need a quick way to transfer files from your old Android device. Then here’s your go-to guide using Wondershare Dr.Fone.

• Step 1: Open Wondershare Dr.Fone on your computer and navigate to the Toolbox section. Select the Phone Transfer tool.

• Step 2: Once opened, set the Source and Destination devices for the data transfer. Use the Flip button to change the transfer direction between the Samsung Galaxy XCover 7 devices.

• Step 3: Set the transfer direction from Samsung Galaxy XCover 7 to iOS. Select the specific data types you want to transfer. Checkmark the desired items and click Start Transfer.

• Step 4: A new window will show the progress of the transfer. If you want to stop the operation, click Cancel.

• Step 5: Once completed, click OK to close the window.

Conclusion

Navigating the digital landscape of photo organization and transfer has become increasingly vital in our fast-paced era. This article showcased various wireless methods, from iCloud to Bluetooth, and offered a step-by-step guide on how to transfer photos from phone to laptop without USB cables. As a valuable bonus, Wondershare Dr.Fone emerges as a trustworthy solution for efficiently transferring photos and files between mobile devices, ensuring a hassle-free experience. As we approach the holiday season, where memories are plentiful, having a reliable tool like Wondershare Dr.Fone can enhance the management of our digital archives, making it easier to cherish and share moments with friends and family.